Here’s is a detailed guide on how to fix Galaxy S4 AP currently not in use Internet connection slow error. Moreover, you are in luck because we will help you fix some more issues that users are facing on Samsung Galaxy S4.
Samsung Galaxy S4 is still used by millions and we have seen many people are still asking about new issues on Galaxy S4. We have covered so much on Galaxy S4, you can give it look it might help you. let’s get started.
Contents
Jump To:
- Root Samsung Galaxy S4 with KingoRoot Android.
- Hide or Display Applications on Samsung Galaxy S4.
- Samsung Galaxy S4 Black Screen Problem [ Video ].
- Galaxy S4 not charging- grey battery.
- Fixed Galaxy S4 Wi-Fi is ‘Stuck On’ Turning On.
Fix Galaxy S4 AP currently not in use Internet connection slow:
First thing first, the reason behind AP currently not in use Internet connection slow error is your phone’s Wi-Fi configuration. Sometimes we don’t notice but our Phone’s WiFi configuration is set to avoid distinguished slow networks. That’s why you start facing this error.
Heed the instructions below to fix this error.
- Settings.
- WiFi.
- More Settings.
- Advanced.
- Disable or Uncheck Avoid poor connections option.
This will get things going. However, if still there is no green light for you then proceed with the following workaround.
- Go to Settings
- Tap Wi-fi.
- You have to forget your current connected WiFi connection.
- Now you have to again connect to your WiFi network. When you see the Pop-up asking for the password, you’ll see 2 checkboxes. Check both of them and then enter your password.
- Scroll down and look for DHCP or Static settings.
- Select Static.
- Enter your computer’s IP address.
- Tap OK.
That’s it. Now you can easily connect to your WiFi network without any resistance. Now let’s proceed further and help you with issues on Samsung Galaxy S4.
Galaxy S4 voice option when texting not working properly:
Method1:
- One your Android device, open Settings > Applications / Applications Manager > All Apps
- Scroll all the way down and locate Message.
- Tap Message to open its settings.
- If you’re using Android Marshmallow or higher, you will have to tap Message > Storage to open cache and data options.
- Now tap Clear Data and Clear Cache.
- Now restart your Android device now.
Method2:
- Turn off your device.
- Now press and hold home+Power+Volume Up key.
- Release the power button once you see the logo, but keep holding home and Volume up keys.
- Now when you see Android logo, let go both buttons.
- Use the volume down button to navigate and highlight wipe data/factory reset.
- Now use the power key to select the option.
- You have to select ‘Yes‘ when you’ll be prompted for next menu.
- Now wait for the process to be completed, once it’s done highlight ‘Reboot system now’ and press power button to select it.
- All Done.
Galaxy S4 “A USB device has exceeded the power limits of its hub port” error:
To be honest we haven’t found a working solution for this error. Your best bet will be to go to nearest Samsung service center and let it check by the professionals.
Fix Galaxy S4 won’t turn on:
You can check our detailed guide on Fix Samsung Galaxy S4 Won’t Turn On.
Rooted Galaxy S4 dialer app not working:
You can always use an alternate app since you have a rooted device. But not everyone goes for it, the best solution we can provide is that you should flash the original firmware. This will bring back everything as it was.
