Install Official TWRP on Galaxy A8+ 2018

Samsung Galaxy A8+ 2018 is the mid-range phone from Samsung, launched in January this year. The Galaxy A- Series is very well known for their build quality and looks more than they are known for performance. For instance, Samsung now gives a lot of customization option, where you can uninstall applications you do not want to use. However, a senior XDA member  BlackMesa123 ported the Official TWRP on Galaxy A8+ 2018. Here’s a simple guide on how to Install Official TWRP on Galaxy A8+ 2018.

The Samsung Galaxy A8+ 2018 is powered by Exynos 7885 Octa processor coupled with 6GB RAM for the 64GB ROM model & 4GB RAM for the 32GB ROM model. It Features a 6.0 inch, 18.5:9 ratio Super AMOLED capacitive touchscreen display with 1080 x 2220 pixels resolution. AMOLED displays have better color saturation, amazing contrast and above all when there are black pixels on the display, it actually turns off that individual pixel to increase the contrast and save some battery as well. The main camera is of 16 MP, f/1.7 lens. Besides the selfie camera packs a dual-camera setup with 16 MP, f/1.9+8 MP, f/1.9 lens.

TWRP

Rooting and installing Custom Recoveries like TWRP or CWM will always allow you to try most of the latest released Android OS on your phone before the official Stock ROM release. If you want to unleash the full power of Android Modding, then flashing TWRP Recovery is the first priority to get all modding ability on your phone. If you have a TWRP Recovery On any Android Phone, you can always try Custom ROM, Kernel, Xposed, Rooting, Mods, etc in few simple steps.

The recovery, simply put, is a runtime environment separate from Android that can perform various system-related tasks. The stock recovery on most Android devices can apply OTA updates, delete user and cache content, and allow external tools from a microSD card to run functions on the device. TWRP is one of the most popular custom recoveries for Android smartphones. It is a touch-based custom recovery with an intuitive interface and a lot of useful functions.

It has an intuitive touch interface with a lot of useful options. You can take Nandroid backups, restore the backups in case your device stuck at bootloop, flash custom ROMs, mods and any flashable ZIP file. Apart from that, you can wipe individual partitions on your device, run custom scripts and much more.

TWRP Recovery is a Custom Recovery which is also known as TeamWin Recovery built with a touchscreen-enabled interface which allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.

Pros

1. You can flash Custom ROM with TWRP Recovery
2. You can flash modding zip files to customize your phone
3. Easy to Root and Unroot using TWRP Recovery flashable zip SuperSU
4. You can always take FULL NANDROID Backup in case of any modding or flashing
5. Easy access to restore the Nandroid Backup
6. You can flash the image file using TWRP Recovery
7. Can remove all bloatware using TWRP Recovery
8. To underclock and overclock
9. You can clean Wipe, Cache, and Data

So, if you’re ready to go, let’s see how to unlock the bootloader and Install Official TWRP on Galaxy A8+ 2018.

Prerequisites

1. This guide is only for the Galaxy A8+ 2018. Do not try this on any other phone.
2. Charge your phone good enough so that it doesn’t go dead during the installation process.
3. Backup your call logs, contacts and SMS messages. Also backup your media content. This is important since unlocking the bootloader will completely wipe your phone.
4. Enable OEM Unlocking and USB Debugging mode on your device.
5. Use the OEM data cable to connect your phone to your PC.
6. Your device must not be RMM locked. Given below are the ways to identify the RMM lock.
7. Reboot to download mode. If you see the text RMM state = Prenormal, then it means your device is RMM locked.
8. The OEM unlock option is not available under the Developer options after you have enabled it. If it’s not available, then that is because your device is RMM locked. It should be available normally.
9. When you boot to recovery mode again, you get the message “Only official released binaries are allowed to be flashed”. This also means that your Galaxy A8+ 2018 is RMM locked.

Download TWRP Recovery for Galaxy A8+ 2018

• Samsung USB drivers
• Download  Odin3 v3.13.1 on your PC and extract it to get Odin3.exe.
• TWRP
• latest no-verity-opt-encrypt zip 
• RMM Bypass zip

How to Install Official TWRP on Galaxy A8+ 2018

1. Boot Galaxy A6 into download mode. To do this follow the below steps.
   1. Switch off your device. Now press and hold the Volume Down + Power + Volume Up together till you see a warning screen.
   2. Once Press Volume Up button to confirm to enter into Download Mode.
2. Download and open Odin3 v3.13.1.exe on your PC and then connect your Galaxy A6 to the PC with a USB cable.
3. When Odin recognizes your device you’ll be shown as Added!! message in log box. If it was not showing, reinstall the drivers.
4. The ID:COM port in Odin will turn yellow if you have installed correct drivers.
5. Download the TWRP file in your PC and load it into Odin. To do this, click on the AP button on Odin and select the TWRP file.
6. Go to the options tab to check whether Re-partition and Auto Reboot checkboxes are selected or not. If they were selected deselect them.
7. Click on the Start button and the TWRP file will be installed on your Galaxy A8+ 2018. It’ll be ended up with the message PASS! on successful installation of TWRP recovery.
8. Repeat the process if you got any error.
9. Force reboot and access the recovery mode again to get to TWRP recovery. To do this
   • Press and hold Volume down + Power button together until the screen goes off, but once the screen goes off, do this quickly: while still holding the Power button, press Volume Up in place of Volume down button to reboot into recovery mode.
10. You’ll be now welcomed with TWRP home screen and it will be asking you for “allow for System modification”. Tap on the “Keep Read Only” button to not allow system modification and access TWRP safely.
11. Click on Reboot>>System.

That’s all. You have successfully installed TWRP on your Galaxy A8+ 2018 smartphone. You can reboot into recovery mode by pressing “Volume up + Power” buttons until your device boots into recovery mode.