Do you have Moto G4 and G4 Plus? Facing issues like Bootloop, got laggy or anything? Looking for a method to fix it? After Installing Custom ROM not enjoying it? You have comes to the right place. In this post, I’ll have a universal solution for all the issues and also those who are looking for Stock Firmware of Moto G4 and G4 Plus, they can download it from below.
A Stock firmware is the best solution for all the issues you are facing while using your smartphone running on custom ROMS. People are looking for Moto G4 Plus flash file, means they are looking for Stock Firmware of Moto G4.
Download Stock Firmware of Moto G4 and G4 Plus:
Keep that in mind after flashing Stock firmware you will lose your root, also if your device is stuck in bootloop or your device is in Brick state, flashing stock firmware will fix both of the issues.
Download Moto G4 Plus flash file:
- Download Stock ROM for Moto G4 Plus XT1641-XT1643 – Download
Download Moto G4 Flash File:
- Download Flashstock.zip file – Download
- Download Stock Firmware of Moto G 4th gen [All variants] – Download
- Download Stock ROM for Moto G4 XT1622 ATHENE – Download
Download ADB and fastboot driver for windows.
Download USB Drivers for Motorolla.
This guide is only for Moto G4 and G4 Plus:
Make sure that your device is exactly as mentioned above. In case you try this method on any other device, you might end up killing your device permanently.
The battery should be charged at least 60%!:
Your device’s battery shouldn’t be weak. In case your device goes dead during the flashing process, your device may get soft bricked and you might be in need of flashing stock firmware and that will ultimately result in wiping up your data as well. So, make sure that you charge your device before you start the flashing process.
Flash Stock Firmware on Moto G4 and G4 Plus:
Step1: Download Motorolla USB Drivers, ADB, and Fastboot drivers. Install them.
Step2: Download the Stock File for your device and extract it into the ADB installation directory.
Step3: Now in adb and fastboot folder, hold Shift Key + right click to open the command window.
Step4: Reboot your device into Bootloader, Turn off your device while holding Power + Volume Down.
Step5: Run the script flashstock.bat to flash the Stock Firmware.
Step6: That’s all, wait for the process to get completed.
This is how you can flash Stock firmware on Moto G4 and G4 Plus. Please do tell me in comments if you face any issue.