Update Xperia Tablet Z SGP 311, SGP 312 & SGP 321 To Official Android 5.1.1 10.7.A.0.222 Firmware

Sony seems to be fulfilling all of its promises that it made to its loyal fans. Sony has started pushing the Android 5.1.1 Lollipop update for the original Xperia Z family. Since the original Xperia Tablet Z is the member of this family, so this tablet has also received the update. All variants of Xperia Tablet Z including the WiFi only SGP 311, 3G SGP 312 and LTE SGP 321 are being update to this latest version of Android now.

The new update carries some bug fixes and performance enhancements. This update is rolling out through OTA and Sony PC Companion for now. If your region hasn’t been lucky enough to catch this update yet, you may want to update your Tablet Z to Android 5.1.1 Lollipop instantly using an alternative. In case you’re looking for such a method, you may have spotted the right place.

We are going to show you a detailed guide to update your Xperia Tablet Z SGP 311, SGP 312 & SGP 321 to latest Android 5.1.1 Lollipop 10.7.A.0.222 firmware using Sony Flashtool. Let’s put a full stop to our conversation here and update your Tablet Z now.

Some early preparations: 

1. This is only for Sony Xperia Tablet Z

This ROM is only for the device mentioned above. Make sure that your model number matches the one listed above. To do so, go to Settings > About Device on your device and see your model number. Flashing this firmware on any other device will result in bricking it so make sure that you meet this requirement first of all.

2. Battery should be charged at least over 60%.

Make sure that your battery is charged enough to complete the flashing process. In case your battery is low and your device goes dead during the flashing process, you may end up soft bricking your device as it won’t complete the flashing process.

3. Backup everything!

Just to be on the safe side, you may consider backing up each and everything from your Android device. This is highly recommended so that in case anything goes wrong, you still have the access to all of your data and you can restore it immediately. You may backup everything as listed below.

• Backup SMS Messages
• Backup Call Logs
• Backup Contacts
• Backup Media – Copy your files manually to your PC or Laptop.

4. Enable USB Debugging Mode on your device.

Enable USB debugging mode on your device. To do so, tap settings>developer options>USB debugging. If you can’t find developer options in settings, then tap settings > about device and tap “Build Number” for 7 times and you’ll get em’ activated under settings.

5. Install and setup Sony Flashtool.

You must have installed Sony Flashtool. Find the full guide here.

After installing Sony Flashtool, open the Flashtool folder from the drive where you installed it. Now open Flashtool>Drivers>Flashtool-drivers.exe and install the Flashtool, Fastboot & Xperia Tablet Z drivers from the list. [Important]

6. Use OEM data cable to establish connection.

Make sure that you use the phone’s original data cable to establish connection between your phone and the PC. Using a different data cable might result in interrupting the firmware installation.

How To Update Sony Xperia Tablet Z SGP311, SGP312 & SGP 321 To Official Android 5.1.1 Lollipop 10.7.A.0.222 Firmware

Before moving forward, please make sure that you’ve read the pre requisites and ensure that you are set to go ahead.

1. Download the latest firmware Android 5.1.1 Lollipop 10.7.A.0.222 FTF file.
   1. For Xperia Z Tablet Z SGP 311, SGP 312 & SGP 321: Create your own FTF using this guide. [In case you don’t want to create the FTF, the link will be added in a few hours, you may wait.]
2. Copy the file and paste in Flashtool>Firmwares folder.
3. Open Flashtool.exe now.
4. Hit the small lightening button on the top left corner and select Flashmode.
5. Select the FTF firmware file that you placed in the Firmware folder.
6. From the right side, select what do you want to wipe. Data, cache and apps log, all wipes are recommended, perhaps you may select if you don’t want.
7. Click on OK, and it will start preparing the firmware for flashing. This may take a little while to load.
8. As soon as the firmware is loaded, it will prompt you to attach the phone by turning it off and keeping the back key press.
9. For Tablet Z Volume Down key will do the job of back key, just turn off your phone, keep the Volume Down key pressed and plug in the data cable.
10. As soon as the phone is detected in Flashmode, the firmware will start flashing, leave the Volume Down key and let it flash the firmware.
11. As soon as you see “Flashing ended or Finished Flashing” leave the Volume Down key, plug the cable out and reboot.
12. That’s All! Congrats! You’ve installed latest Android 5.1.1 Lollipop on your Tablet Z Enjoy

In case you got any queries or face any problems regarding this guide, please feel free to stop by the comment box below and let us know. We will get back to you as soon as possible. Thanks all!