Root Samsung Galaxy S6 Edge G925F via CF-Auto Root

Samsung Galaxy S6 Edge is the secondary flagship from Samsung, released with their Primary flagship of this year, Galaxy S6. Arrived in the market in April, with 5.1-inch screen size, powered by the Exynos 7420 Quad-core 1.5 GHz Cortex-A53 and Quad-core 2.1 GHz Cortex-A57, with Mali-T760MP8 for extreme gaming, although it will heat-up a little after an hour or so, available in 32, 64 and 128GB variants and ported with 3GB of RAM, with 16MP of Rear cam, featuring almost everything necessary in a Mobile cam, running Android 5.0.2 Lollipop from the start, this device can be the Best gadget of this year, I can assure you, unless we get to see something even amazing than this.

It has been quite a time since its announcement and we are seeing the rooting method of Samsung Galaxy S6 Edge SM-G925F and the best part it is CF-Auto root tool, that does the job in no time. For all those who don’t know much about CF-Auto root tool, this is a one-click tool to root any device that supports it and in case of Samsung, we have a flash tool to use this CF-Auto root file. Then afterwards, it is up-to you to flash the TWRP recovery and enter the world of ultimate customization.In this article, we will show you How to Root Samsung Galaxy S6 Edge G925F via CF-Auto Root, without further ado, let us continue.

Early Preparations:

• This is only for Galaxy S6 Edge!
• Battery should be charged at least over 60%
• Backup EFS
• Backup SMS Messages
• Backup Call Logs
• Backup Contacts
• Backup Media – Copy your files manually to your PC or Laptop.
• Titanium Backup – If already rooted, use Titanium Backup to backup all of your apps, system data and other important content.
• Backup Nandroid – If CWM  or TWRP installed previously, otherwise skip this step and perform this at the end of flashing

Downloads Required:

CF-Auto Root: Link

How to Root Galaxy S6 Edge:

1. Download and extract Odin3 v3.09.
2. Download and Install Samsung USB drivers .

Installation:

1. Wipe your device completely in order to attain a neat installation.
2. Open Odin3.exe.
3. Put your Galaxy S6 in download mode. To do so, turn it off and wait for 10 seconds. Turn it on by pressing and holding Volume Down + Home Button + Power Key simultaneously, You should see a warning, press Volume Up to continue. In case this method doesn’t work for you, try one from this guide.
4. Connect your device to your PC.
5. As soon as Odin detects your phone, the ID:COM box should turn blue.  Make sure that you’ve installed Samsung USB drivers before connecting.
6. For Odin 3.09 hit the AP tab. Select the CF-Auto-Root-zerolte-zeroltexx-smg925f.zip, that you downloaded and extracted above.
7. If you’re using Odin 3.07, you will select “PDA” tab instead of the AP tab, rest of the options remain untouched.
8. Make sure that the options selected in your Odin are exactly as shown in the pic.
9. Hit start and wait till the file flashing is complete, as soon as your device restarts, remove it from PC.
10. Wait for your device to reboot, as soon as it reboots check out the new firmware!
11. That’s all!