Install Android 4.4.4 KitKat On Sony Xperia P With CM 11 Custom ROM

Sony’s Xperia P is a great mid-range device. Although this device is pretty much old now, but is still used by so many users across the world. Xperia P sports a 4.0 inches screen with 275 ppi. Under the hood is a 1.0 GHz dual core CPU accompanied by Mali-400 GPU. There’s a RAM of 1 GB, internal storage is ranged at 16 GB. At the back Sony has placed an 8.0 MP shooter while a VGA shooter on the front, no doubt Sony always produces the best cameras for its smartphones. The only thing this device lacks in, is its software. Xperia P ran on Android Gingerbread out of the box and the device could only get Android 4.1 Jelly Bean as its higher update.

While Google is heading towards Android L, this leaves Xperia P users in a little bit of disappointment having their device on the very old Android 4.1 Jelly Bean firmware. But this should eventually come to an end since there’s a number of great developers coming up lots of custom firmwares for so many Android devices. These custom firmwares definitely give the forgotten devices a new life by letting the users taste higher version of Android unofficially. Similar thing for the Xperia P has been done by XDA senior member percy_g2 who brought the users Android 4.4.4 KitKat based on CyanogenMod 11 custom ROM. 

In case you don’t know about CyanogenMod, CyanogenMod is the most popular and widely used aftermarket Android firmware that is available for so many devices. In the following post we are going to install this Android 4.4.4 KitKat CyanogenMod 11 custom ROM on our beloved Sony Xperia P. Let’s go through the early preparations and begin with the ROM installation.

Early Preparations:

1. This is only for Sony Xperia P!

This custom ROM is only for the device mentioned above. Make sure that your model number matches the one listed above. To do so, go to Settings > About Device on your device and see your model number. Flashing this ROM on any other device will result in bricking it so make sure that you meet this requirement first of all.

2. Battery should be charged at least over 60%.

Make sure that your battery is charged enough to complete the flashing process. In case your battery is low and your device goes dead during the flashing process, you may end up soft bricking your device as it won’t complete the flashing process.

3. Unlock Bootloader.

Your device’s bootloader must be unlocked in order to flash this custom ROM. You can unlock it by using our Sony bootloader unlock  guide.

4. Backup everything!

Just to be on the safe side, you may consider backing up each and everything from your Android device. This is highly recommended so that in case anything goes wrong, you still have the access to all of your data and you can restore it immediately. You may backup everything as listed below.

5. Disclaimer

The methods involved in flashing custom recoveries, roms and rooting your phone are highly custom and may result in bricking your device, and has nothing to do with Google or the device manufacturer that is Sony in our case. Also rooting your device will void its warranty and you will be no longer eligible for any kind of free device services by the manufacturers/warranty providers. In case of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility.

How To Install Android 4.4.4 KitKat On Sony Xperia P:

  1. Download the cm-11-20140804-SNAPSHOT-M9-nypon.zip [ROM.zip] file.
  2. Download Google Gapps.zip for Android 4.4.4 KitKat Custom ROM.
  3. Place the ROM.zip file and Gapps.zip file on your phone’s internal or external sd card.
  4. Download Android ADB and Fastboot drivers, follow our full guide here to make it easy.
  5. Open the downloaded ROM.zip on your PC and extract the Boot.img file only.
  6. Now place the kernel file that is boot.img file that you extracted from the zip folder in the fastboot folder that you downloaded from the guide linked above.
  7. After placing the kernel file in the fastboot folder, open the fastboot folder. Press shift and then Right click on any empty area inside the folder, now select “Open command prompt here“. flash it using the command   fastboot flash boot boot.img”. In case you are confused, follow the Android ADB & Fastboot drivers guide carefully.
  8. Boot into CWM recovery. To do so, turn off your device, now turn it on and quickly press volume up key, you will get the CWM interface.
  9. In CWM wipe the factory data, cache and dalvik cache.
  10. Now select “Install Zip>Choose Zip from Sd card / external Sd card”.
  11. Select the ROM.zip file that your placed on your phone’s Sd card.
  12. It should take a few mins to flash the ROM, now once again select “Install Zip>Choose Zip from Sd card / external Sd card”.
  13. Choose the Gapps.zip file this time and flash it.
  14. As soon as done flashing, clear cache and dalvik cache again.
  15. Reboot system now, you should see the CM logo on the boot screen now, it may take upto 10 minutes in order to boot into home screen.
  16. Congrats! Enjoy unofficial Android 4.4.4 KitKat custom ROM on your Sony Xperia P now.
  1. That’s all with the ROM installation. In case you’re stuck with anything or you’re facing any issues, feel free to drop your words in the comment box below. We will get back to you as soon as possible.

This post was last modified on August 29, 2014 9:18 pm

Usama M

Usama is a software engineer by profession and at TechBeasts.com he uses his expertise to solve everyday consumer tech problems with his main areas of interest being Android, iOS and Windows.

View Comments

  • Hi i usually come here to find the new rom for my Xperia P, Now i dont know what rom to put in I want the latest CM11 (cuz i dont like the CM12) but there is to many roms and link from cyanogenmod ie: "http://builds.hubdroid.com/cm11/nightlies/final/nypon/".
    I dont know if Cyanogenmod officily ported de CM11 for Xperia P.
    How do i found the latest rom, in that link the latest update was 07/04/15 oh right, and here "http://d-h.st/users/percy_g2?fld_id=28881" the latest update 17/06/14.
    What ROM i have to download? I dont want a bugged one.
    And last question what means "nightly" "nyphon" and why some roms in those links say "unofficial".
    Please respond ASAP.

Share
Published by
Usama M

Recent Posts

Snapchat not working? Here are the top 7 solutions you should try

Snapchat is a popular social sharing platform so when something goes wrong it can be…

3 years ago

Android 12: Details on the CDD arrives – How the performance classes will work

Android 12 Compatibility Definition Document (CDD) calls for device manufacturers to specify the performance classes…

3 years ago

Telegram: Beta 8.0.0 news for Android plus new feed for channels

New features in Telegram Beta 8.0.0 for Android include group video chat 2.0, live video…

3 years ago

Blackout Bingo for PC – Play for free on Windows 10, Mac

Download the Blackout Bingo app on your PC. With a competitive twist to the classic…

4 years ago

Wombo for PC – Use for free on Windows 10, Mac

Download the Wombo app on your PC. All you have to do is add a…

4 years ago

Golf Rival for PC – Play for free on Windows 10, Mac

Download the Golf Rival app on your PC. Follow the steps discussed below to get…

4 years ago

This website uses cookies to provide you up-to-the-mark services.