Install Crash ROM V1.5 On Samsung Galaxy Tab 3 7.0 TR-210R

Samsung Galaxy Tab 3 7.0 GSM version has received the official update of Android 4.4.2 Kit-Kat, but all other variants are still in the line to get it. Even the Custom ROMs are not available based on Android 4.4.2, but still custom ROMs works like a charm even if they are based on Android 4.1.2 Jelly Bean, and what Kit-Kat can support is also supportable by Jelly Bean as well, along with that the best battery timing was in Android 4.2.2 Jelly Bean. In my opinion, Android 4.4 Kit-Kat was just a fluke, may be to give the Android L/5.0 more time, while people still carve for Android 4.4 Kit-Kat. Despite people rushed to update to Android 4.4, however, I loved to stay on the Android 4.2.2 or Android 4.3, and absolutely loved it.

Samsung Galaxy Tab 3 7.0 TR-210R has a very special custom ROM for it, Crash ROM v1.5 is the best ROM available for Galaxy Tab 3 7.0. Based on Android 4.1.2 Jelly Bean, this ROM can pack a powerful punch. It is completely stable, Clean and Xposed Framework is already installed in it. More Tweaks has been installed in this version, to give better RAM boost, to Reduce Lag, for Better Image Quality and Video quality, not to mention Google Keyboard and the best of all OTA update support. If you are interested in Other ROMs, you can Visit our Custom ROMs section or you can install this ROM on your Galaxy Tab 3 7.0 by following our tutorial below. This is not an official release from Samsung but a Custom ROM, you need to install a Custom Recovery on your device to install this and also your device must be rooted.


In this Article,  we will show you How To Install Crash ROM V1.5 On Samsung Galaxy Tab 3 7.0 TR-210R. But before we begin, Make sure:

  1. That you have a Well Charged Battery, 60%-80% is better.
  2. Back-Up all your important ContactsCall Logs & Messages.It is highly recommended in case of any mishap or data loss to back up all your important data.
  3. Back-Up your Mobiles EFS Data. How To Restore and Back-Up EFS Data On Samsung Galaxy Devices
  4. Check your device model, Go To Setting > About and Make sure that it is TR-210R.
  5. Do-not try it on any other device.
  6. Enable USB Debugging Mode
  7. Download USB Driver For Samsung Devices: Link
  8. Root Your Device: Link
  9. Install CWM/TWRP Recovery on Your Device: Link


The methods involved in flashing custom ROMs and rooting your phone is highly custom and may result in bricking your device,and has nothing to do with Google or the device manufacturers which is SAMSUNG in our case. In case of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility.

Downloads Required:

Crash ROM V1.5 ROM: Link

How To Install It.

  • Connect your device with PC.
  • Copy and Paste the Above zip files to the root of your sdcard.
  • Disconnect the cable.
  • Turn Off your Device
  • Open Recovery mode. How? Press and hold the Volume Up + Home + Power buttons until you see some text on screen.

CWM/PhilZ Touch Recovery Users.

  1. Back-up your ROM using the Recovery.
  2. To Perform a Back-up, Navigate to Back-up and Restore, on Next screen, Choose Back-up again.
  3. Go back to Main Screen after the Back-up is complete.
  4. First Choose ‘Wipe Cache’.
  5. Then Navigate to ‘advance’ and choose ‘Devlik Wipe Cache’ so you won’t get in any bootloop.
  6. Then Finally Choose Wipe Data/Factory Reset.
  7. Navigate to ‘Install zip from sd card’ another windows will open in front of you.
  8. Select ‘choose zip from sd card’ from the Options.
  9. Select the file and confirm the installation on next screen.
  10. Once the Installation is Over, Select +++++Go Back+++++
  11. Select Reboot Now to Reboot the System.

TWRP Users.

  1. Tap on Wipe Button and Select Cache, System, Data.
  2. Swipe the Confirmation Slider.
  3. Go back to Main Menu and Tap Install Button.
  4. Locate the , Swipe the Slider To install it.
  5. Once the Installation is Over, you will promoted to Reboot System Now
  6. Select Reboot Now to Reboot the System.

Solve Signature Verification Error:

  1. Open Recovery.
  2. Navigate to install zip from Sdcard
  3. Navigate to Toggle Signature Verification and Press Power Button and See if it is disabled or not. Disable it and then Install the Zip without any Error.

That is it! Just wait for almost 5-minutes, you’ll find your Galaxy Tab 3 7.0 Running Crash ROM V1.5, Go to Settings > About to vefiry

© 2018 TechBeasts. All rights reserved.· is not associated with Google, Samsung or any other OS provider and smartphone manufacturer. We are an unofficial fan site.