How To Install Andro X on Moto G XT1068 2014

The most awaited game has begun for Moto G 2014 as the first Flash-able Zip ROM is now available for Moto G 2014. Andro X is a complete and pure Android experience, the ROM is based on Stock firmware, Gapps, despite that they are necessary, however, not all of them, unwanted Gapps are removed and also some of the Moto Apps are removed too. Xposed Installer is there for you to Install Xposed Framework in it, Gravity Box, something that I haven’t seen in a ROM, by Default, for a long time. Pre-Rooted, you don’t have to worry about Root access, CM file manager is there too, you don’t have to install any other File manage, as this can do most of the things compared to most of the File managers out there.

Furthermore, since there are less Bloats in it, RAM usage is quite less than usual, DSP manager for sound boost and audio control, Android boot Animation is there to make you feel that your device is running Pure Android. Andro X is based on Android 4.4.4 Kit-Kat, this ROM is the first flash-able zip file for Moto G 2014, so if I were you, or owns the Moto g 2014, I would definitely have updated my device to this ROM. However,If you are interested in Other ROMs, you can Visit our Custom ROMs section or you can install this ROM on your Moto G 2nd GEN by following our tutorial below. This is not an official release from Google but a Custom ROM, you need to install a Custom Recovery on your device to install this and also your device must be rooted.Let’s go through the ROM features and early preparations and then flash this ROM.


Early Preparations:

1. This is only for Moto G 2014!

This custom ROM is only for the device mentioned above. Make sure that your model number matches the one listed above. To do so, go to Settings > About Device on your device and see your model number. Flashing this ROM on any other device will result in bricking it so make sure that you meet this requirement first of all.

2. Battery should be charged at least over 60%

Make sure that your battery is charged enough to complete the flashing process. In case your battery is low and your device goes dead during the flashing process, you may end up soft bricking your device as it won’t complete the flashing process.

3. Flash a Custom Recovery

A custom recovery, a CWM  or TWRP is required to flash this ROM. You need to root your device too, so follow the Root link to do so

4. Backup everything!

Just to be on the safe side, you may consider backing up each and everything from your Android device. This is highly recommended so that in case anything goes wrong, you still have the access to all of your data and you can restore it immediately. You may backup everything as listed below.

5. Disclaimer

The methods involved in flashing custom recoveries, roms and rooting your phone are highly custom and may result in bricking your device, and has nothing to do with Google or the device manufacturer that is Google in our case. Also rooting your device will void its warranty and you will be no longer eligible for any kind of free device services by the manufacturers/warranty providers. Incase of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility.

Downloads Required:

 Android 4.4.4 Kit-Kat Andro X ROM: Link

How To Install This ROM:

  1. Download ROM from above and Copy it to the root fo your Sd card
  2. Open Recovery mode. How? Connect your device with PC and open Command prompt in fastboot folder,How? Hold Shift Key and Right Click anywhere in the Fastboot folder
  3. Now Type: adb reboot recovery

CWM/PhilZ Touch Recovery Users.

  1. Back-up your ROM using the Recovery.
  2. To Perform a Back-up, Navigate to Back-up and Restore on Next screen, Choose Back-up again.
  3. Go back to Main Screen after the Back-up is complete.
  4. Then Navigate to ‘advance’ and choose ‘Devlik Wipe Cache’, so you won’t get in any bootloop.
  5. Navigate to ‘Install zip from sd card’ another windows will open in front of you.
  6. Select ‘choose zip from sd card’ from the Options.
  7. Select the Andro file and confirm the installation on next screen.
  8. Now In Aroma Installer, Choose Wipe Data/Factory Reset.
  9. Then choose whatever you like from the Options and Continue
  10. Once the Installation is Over, Select +++++Go Back+++++
  11. Select Reboot Now to Reboot the System.

TWRP Users.

  1. Tap On Back-Up and Select System and Data
  2. Swipe the Confirmation Slider
  3. Tap on Wipe Button and Select Cache, System, Data.
  4. Swipe the Confirmation Slider.
  5. Go back to Main Menu and Tap Install Button.
  6. Locate the Andro X.zipSwipe the Slider To install it.
  7. Do a Factory Reset In the Aroma Installer, and After choosing the Options Continue
  8. Once the Installation is Over, you will be promoted to Reboot System Now
  9. Select Reboot Now to Reboot the System.

Solve Signature Verification Error:

  1. Open Recovery.
  2. Navigate to install zip from Sdcard
  3. Navigate to Toggle Signature Verification and Press Power Button and See if it is disabled or not. Disable it and then Install the Zip without any Error.

First Boot might take up-to 5-minutes, so let your device rest for 5-minutes as you do something else.

© 2018 TechBeasts. All rights reserved.· is not associated with Google, Samsung or any other OS provider and smartphone manufacturer. We are an unofficial fan site.