Update Xperia T LT30P to 9.2.A.0.295 Android 4.3 Jelly Bean Stock Firmware

18

Sony has remained very nice to it’s users specially in terms of software updates this time. All the smartphone manufacturers are currently updating their flagship devices to the higher Android versions while Sony took clear lead and started updating its devices to Android 4.3 in mass. Earlier we saw the 4.3 Jelly Bean update hitting Xperia Z, ZR, ZL and Ultra Z while now the low end devices Xperia T, TX & V have started receiving Android 4.3 Jelly Bean.

The new update packs up a lot of bug fixes and performance enhancements for sure but on the streamline Sony has updated the Sony Media Apps, User Interface has been updated for faster and smoother performance and graphical experience. User interface has been changed with new home screen look and feel. Battery performance has been improved and the Android 4.3 update has became a little more secure software for these devices.

Well, as you all know, these software updates hit different regions with time. Many of the Android enthusiasts might be looking for a way to update their device to the latest firmware and may not find any OTA update or through Sony PC companion. In that case this post will definitely help you. In the following post we are going to install the latest stock Android 4.3 Jelly Bean 9.2.A.0.295 firmware on Xperia T LT30P. Let’s move forward step by step.

Here are some important installation instructions:

      1. This guide is only for Sony Xperia T LT30P. Please check your device model first in Settings > About Device > Model.
      2. You must have installed Sony Flashtool – Get the full guide here. Also Install drivers using Flashtool > Drivers > Flashtool-drivers > Flashtool, Xperia T, Fastboot, select all these and install.
      3. Your phone’s battery must be charged at least over 60%. This is highly recommended in order to prevent any power issues during the process.
      4. Flashing this firmware will wipe all your apps, apps data, system data, contacts, call logs & messages. It will not wipe the internal storage (media) data. Proceed after you’ve backed up, in the next step the guides are linked in.
      5. Make sure that you backup your media content,contactscall logs and text messages.  This is important and recommended so that in case you decide to wipe your phone during the flashing process, you can get all of your data back using the backup.
      6. Enable USB debugging mode on your device. To do so, tap settings>developer options>USB debugging. If you can’t find developer options in settings, then tap settings > about device and tap “Build Number” for 7 times and you’ll get em’ activated under settings.
      7. To flash this firmware, you do not need to root your device, you do not need to unlock the bootloader. All you need is, your device must be the one mentioned and must be running on Android 4.2.2 Jelly Bean.
      8. Download the firmware file properly.
      9. Use the OEM data cable to connect your phone to your PC. Using any other data cable might cause connection problems.
      10. You need enough confidence to perform this custom method.
      11. Alright! Follow this guide to the letter in order to prevent any mishap.

How to Install Android 4.3 9.2.A.0.295 Official Firmware on Xperia T LT30P

      1. Download Stock Android 4.3 Jelly Bean 9.2.A.0.295 Firmware for Xperia T LT30P [Unbranded / Generic]
      2. Copy the file and paste in Flashtool>Firmwares folder.
      3. Open Flashtool.exe now.
      4. Hit the small lightening button on the top left corner and select Flashmode.
      5. Select the FTF firmware file that you placed in the Firmware folder. 
      6. From the right side, select what do you want to wipe. Data, cache and apps log, all wipes are recommended, perhaps you may select if you don’t want.
      7. Click on OK, and it will start preparing the firmware for flashing. This may take a little while to load.
      8. As soon as the firmware is loaded, it will prompt you to attach the phone by turning it off and keeping the back key press.
      9. For Xperia TVolume Down key will do the job of back key, just turn off your phone, keep the Volume Down key pressed and plug in the data cable.
      10. As soon as the phone is detected in Flashmode, the firmware will start flashing, Do not leave the Volume Down key until the process is complete.
      11. As soon as you see “Flashing ended or Finished Flashing” leave the Volume Down key, plug the cable out and reboot.
      12. That’s All! Congrats! You’ve installed latest Android 4.3 Jelly Bean on your Xperia T Enjoy.

Here are some screenshots:

Xperia-T-Android-4.3-screen_1-315x559

Xperia-T-Android-4.3-screen_2-315x559Xperia-T-Android-4.3-screen_5-315x559 Xperia-T-Android-4.3-screen_6-315x560Xperia-T-Android-4.3-screen_7-315x559Xperia-T-Android-4.3-screen_8-315x559 Xperia-T-Android-4.3-screen_9-315x559Xperia-T-Android-4.3-screen_11-315x559Xperia-T-Android-4.3-screen_12-315x559

That’s All! In case you got any queries/suggestions or face any difficulties regarding this post, please feel free to stop by the comment box below and drop us your message. We will respond as quick as we can.

SHARE
Usama is a software engineer by profession and at TechBeasts.com he uses his expertise to solve everyday consumer tech problems with his main areas of interest being Android, iOS and Windows.

18 COMMENTS

    • @fazullahkharoti:disqus you can change the language on startup. Those images are collected from other source actually. Just flash the firmware and chose your desired language 🙂 Good Luck

  1. Hi. Can’t install. My Xperia T is running on Android 4.1.2 (9.1.A.1.141). May you please help me some way?This is the log:

    24/015/2014 12:15:29 – INFO – Selected Bundle for LT30p. FW release : 9.2.A.0.295. Customization : Generic IT
    24/015/2014 12:15:29 – INFO – Preparing files for flashing
    24/015/2014 12:15:31 – INFO – Device disconnected
    24/016/2014 12:16:02 – INFO – Please connect your device into flashmode.
    24/016/2014 12:16:20 – INFO – Device connected in flash mode
    24/016/2014 12:16:20 – INFO – Opening device for R/W
    24/016/2014 12:16:20 – INFO – Start Flashing
    24/016/2014 12:16:20 – INFO – Processing loader.sin
    24/016/2014 12:16:20 – INFO – Checking header
    24/016/2014 12:16:20 – INFO – Ending flash session
    24/016/2014 12:16:20 – ERROR –
    24/016/2014 12:16:20 – ERROR – Error flashing. Aborted
    24/016/2014 12:16:20 – INFO – Device connected in flash mode
    24/016/2014 12:16:33 – INFO – Device disconnected
    24/016/2014 12:16:36 – INFO – Device connected with USB debugging off
    24/016/2014 12:16:36 – INFO – For 2011 devices line, be sure you are not in MTP mode
    24/016/2014 12:16:45 – INFO – Device disconnected

    • @serepatinga:disqus You are having connection issues. Please don’t leave the volume down key as the flashing starts. Re-read the guide once again and you will get it working. Good Luck.

  2. This working very well, I stack with JB4.1.2 – with no update, so this give me full 4.3 JB:)
    But I have q. Can I get branded software and use this same way to flash? Where can I get branded software? (Three UK) Thanks for tutorial:)

  3. I did exactly as in the instructions.. And I finally have the 4.3 on my Xperia. 🙂
    Now, I was looking everywhere how to root my phone on 4.3 (9.2.A.0.295) and I couldn’t find anything.. Does someone know how I could do that?

  4. I did exactly as in the instructions.. And I finally have the 4.3 on my Xperia. 🙂
    Now, I was looking everywhere how to root my phone on 4.3 (9.2.A.0.295) and I couldn’t find anything.. Does someone know how I could do that?

  5. I did exactly as in the instructions… but got the following errors

    10/016/2016 18:16:07 – INFO – Device connected in flash mode
    10/016/2016 18:16:18 – INFO – Selected Bundle for Sony Xperia T(LT30p). FW release : 9.2.A.1.205. Customization : Customized IT
    10/016/2016 18:16:18 – INFO – Preparing files for flashing
    10/016/2016 18:16:50 – INFO – Device disconnected
    10/017/2016 18:17:11 – INFO – Device connected in flash mode
    10/017/2016 18:17:22 – INFO – Please connect your device into flashmode.
    10/017/2016 18:17:23 – INFO – Opening device for R/W
    10/017/2016 18:17:24 – INFO – Reading device information
    10/017/2016 18:17:24 – INFO – Phone ready for flashmode operations.
    10/017/2016 18:17:24 – INFO – Opening TA partition 2
    10/017/2016 18:17:24 – INFO – Current device : LT30p – CB5122SMZA – 1266-0613_R3I – 1262-6309_9.1.A.0.489 – GLOBAL-HSPA_9.1.A.0.489
    10/017/2016 18:17:24 – INFO – Closing TA partition
    10/017/2016 18:17:24 – INFO – Start Flashing
    10/017/2016 18:17:24 – INFO – Processing loader.sin
    10/017/2016 18:17:24 – INFO – Checking header
    10/017/2016 18:17:24 – INFO – Flashing data
    10/017/2016 18:17:25 – INFO – Loader : S1_Root_7054 – Version : R5F001 / Boot version : R10AM009 / Bootloader status : UNROOTABLE
    10/017/2016 18:17:25 – INFO – Max packet size set to 64K
    10/017/2016 18:17:25 – INFO – USB buffer size set to 512K
    10/017/2016 18:17:26 – INFO – No flash script found. Using 0.9.18 flash engine
    10/017/2016 18:17:26 – INFO – Opening TA partition 2
    10/017/2016 18:17:26 – INFO – Writing TA unit 00002774. Value : 01
    10/017/2016 18:17:26 – INFO – Closing TA partition
    10/017/2016 18:17:26 – INFO – Processing partition.sin
    10/017/2016 18:17:26 – INFO – Checking header
    10/017/2016 18:17:26 – INFO – Flashing data
    10/017/2016 18:17:27 – INFO – Opening TA partition 2
    10/017/2016 18:17:27 – INFO – Processing boot.sin
    10/017/2016 18:17:27 – INFO – Checking header
    10/017/2016 18:17:27 – INFO – Flashing data
    10/017/2016 18:17:27 – INFO – Closing TA partition
    10/017/2016 18:17:27 – INFO – Opening TA partition 2
    10/017/2016 18:17:27 – INFO – Processing amss_fsg.sin
    10/017/2016 18:17:27 – INFO – Checking header
    10/017/2016 18:17:28 – INFO – Flashing data
    10/017/2016 18:17:28 – INFO – Processing amss_fs_1.sin
    10/017/2016 18:17:28 – INFO – Checking header
    10/017/2016 18:17:28 – INFO – Flashing data
    10/017/2016 18:17:28 – INFO – Processing amss_fs_2.sin
    10/017/2016 18:17:28 – INFO – Checking header
    10/017/2016 18:17:28 – INFO – Flashing data
    10/017/2016 18:17:28 – INFO – Processing apps_log.sin
    10/017/2016 18:17:28 – INFO – Checking header
    10/017/2016 18:17:29 – INFO – Flashing data
    10/017/2016 18:17:30 – INFO – Processing cache.sin
    10/017/2016 18:17:30 – INFO – Checking header
    10/017/2016 18:17:30 – INFO – Flashing data
    10/017/2016 18:17:33 – INFO – Processing fotakernel.sin
    10/017/2016 18:17:33 – INFO – Checking header
    10/017/2016 18:17:33 – INFO – Flashing data
    10/017/2016 18:17:38 – INFO – Processing kernel.sin
    10/017/2016 18:17:38 – INFO – Checking header
    10/017/2016 18:17:38 – INFO – Flashing data
    10/017/2016 18:17:42 – INFO – Closing TA partition
    10/017/2016 18:17:42 – INFO – Opening TA partition 2
    10/017/2016 18:17:42 – INFO – Processing system.sin
    10/017/2016 18:17:42 – INFO – Checking header
    10/017/2016 18:17:43 – ERROR – Processing of system.sin finished with errors.
    10/017/2016 18:17:43 – INFO – Ending flash session
    10/017/2016 18:17:43 – ERROR –
    10/017/2016 18:17:43 – ERROR – Error flashing. Aborted
    10/017/2016 18:17:44 – INFO – Flashing finished.
    10/017/2016 18:17:44 – INFO – Please unplug and start your phone
    10/017/2016 18:17:44 – INFO – For flashtool, Unknown Sources and Debugging must be checked in phone settings
    10/017/2016 18:17:44 – INFO – Device connected in flash mode
    10/017/2016 18:17:45 – INFO – Device disconnected
    10/017/2016 18:17:47 – INFO – Device connected in flash mode
    10/018/2016 18:18:31 – INFO – Device disconnected
    10/018/2016 18:18:46 – INFO – Device connected in flash mode
    10/019/2016 18:19:29 – INFO – Device disconnected

    Please help

Got a question/query or a suggestion? Drop it below.