Install HYD52ROM V7 Android 4.4 Kit-Kat Custom ROM On Huawei Ascend P6-U06[Guide]

Huawie Ascend P6, despite stamping its name in Mobile Market is not receiving the Android 4.4 Kit-Kat Official Firmware. But don’t be sad, if you own this device and want to test how Kit-Kat is like, there is this ROM, which will give you the best Kit-Kat experience ever. HYD52ROM V7 is build from Kitkat Beta With EMUI2.3 and contain almost everything you want in a Performance engine but never dare to asked. No Lag at all, performance is at its peek and customization is just enough to make sure that your device gives you its 100%If you are interested in other ROMs, you can visit our Custom ROM section Or You can update your Huawei Ascend P6 to HYD52ROM V7 Android 4.4 Kit-Kat ROM by following our Tutorial.This is not an official release from Sony, but a Custom ROM, you need to install a Custom Recovery on your device to install it and also your device must be rooted.

AscendP6-HandsOn-04-580-100

But why would anyone goes for a Custom ROM instead of staying on the Stock On, allow me to explain.: “Stock and Official ROMs are good, but they are created with keeping in mind the demands of all,some wants performance and some wants speed, some wants looks, some wants features. Putting them all in one ROM can cause Lag, Performance issuesand bugs. But Custom ROM in basically designed for either Looks or Performance and Custom ROM gives speed and great performance with Tweaks and System Tools.”

In this Article,  we will show you How To Install HYD52ROM V7 Android 4.4 Kit-Kat ROM On Huawei Ascend P6.But before we begin, Make sure:

  1. That you have a Well Charged battery.
  2. Back-up all your important ContactsCall Logs & Messages.It is highly recommended in case of any mishap or data loss to back up all your important data.

Disclaimer:

The methods involved in flashing custom roms and rooting your phone is highly custom and may result in bricking your device,and has nothing to do with Google or the device manufacturers which is LG in our case. In case of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility

Important things:

  • Your Device must be Rooted and Latest Custom Recovery must be installed on it.
  • Enable USB debugging mode.
  • Make sure that battery level is at 85% or more.
  • This Tutorial is Only For Huawei Ascend P6.

Features Of HYD52ROM:

Android performances improved at 360°
– Radically improved management ram on android (Lags…adios!)
– Script lightweight and revised to be adapted to this engine
– Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and… AOSPA 3.60 system tweaks
– Scan multimedia time drastically reduced
– Network Improvements, 3G experience even in 2G modality
– All SQlite database optimized
– Enable hardware features turned off by default for a better experience on entry level devices
– Greatly increases the score AnTuTu: Try it to believe it!!
– Reduces the startup time of Android
– A version for stock rom and one for CM, to squeeze any roms!
– Allows you to play ported games without lags
– Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
– Automatically Zipalign on each boot (sensitive to the user)

Battery

– Drastically decreased the drainage of battery
– Check the activities that consume too much battery stop them with PureWakelocks™
– When the phone is charging reduces system services for faster charging
– The battery is calibrated on every boot
– Disable animation of the system when the battery is nearly exhausted
– Improvements in build.prop as regards the part of consumption

Graphics, Screen, Images

– Enables a non-aggressive dithering to save CPU
– When you lock the device, the engine makes sure that the GPU is turned off
– Enables deep sleepalso in the bugged rom
– Parts of bravia engine
– Of course parts of CrossBreeder (credits to dev)
– Of course parts of Adrenaline Engine (credits to dev)
– Of course PureGraphics HD, even though I already told you
– Of course V6 supercharger
– Generates video entropy (like seeder)

CPU, Governors, I/O Schedulers

– Slightly improves the scaling of the frequencies (for better results you need a good kernel)
– Lightens the load on the CPU switching the workload to GPU rendering
– Enable the swap partition in Android (experimental)

Now Let’s Head Towards the Step-by-Step Guide On How To Install Android 4.2.2 HYD52ROM On Huawei Ascend P6. But let me remind you again, ClockworkMod Recovery(Older Version) is not recommended when it comes to installing this ROM, Only latest versions of TWRP and CWM Touch Recovery for the Device is supported without bugs. So, if you are using an Old CWM Recovery or TWRP on your device Upgrade it to the Latest version, if you want to go with older version, you are on your own. We are warning you that if you used and Older Recovery and Brick your device, We will not be responsible for anything.

Necessary Preparations:

  1. Download Android 4.2.2 HYD52ROM Link
  2. Huawei USB Drivers: Link
  3. USB Debugging is enable, go-to Settings > Developers Option and Tick the USB debugging.
  4. Download Google Apps: Link

How To Install It.

  • Connect your device with PC.
  • Copy and Paste the Above zip files to the root of your sdcard.
  • Disconnect the cable.
  • Turn Off your Device
  • Now go to Bootloader/Fastboot mode, Press and hold Power + Volume Down Buttons till you see some text on-screen.
  • From Bootloader, choose Recovery

CWM/PhilZ Touch Recovery Users.

  • First Choose ‘Wipe Cache’.

Screenshot_18

  • Then Navigate to ‘advance’ and choose ‘Devlik Wipe Cache’ so you won’t get in any bootloop.

Screenshot_5

  • Then Finally Choose Wipe Data/Factory Reset.

Screenshot_1

  • Navigate to ‘Install zip from sd card’ another windows will open in front of you.

Screenshot_2

  • Select ‘choose zip from sd card’ from the Options.

Screenshot_4

  • Select the Android 4.2.2 HYD52ROM.zip file and confirm the installation on next screen.
  • After the Installation, go back and Flash Google Apps.
  • Once the Installation is Over, Select +++++Go Back+++++.
  • Select Reboot Now to Reboot the System.

Screenshot_6

TWRP Users.

TWRP-2.3.3.01 (1)

  • Tap on Wipe Button and Select Cache, System, Data.
  • Swipe the Confirmation Slider.
  • Go back to Main Menu and Tap Install Button.
  • Locate the Android 4.2.2 HYD52ROM and Google Apps , Swipe the Slider To install it.
  • Once the Installation is Over, you will promoted to Reboot System Now
  • Select Reboot Now to Reboot the System.

Solve Signature Verification Error:

  • Open Recovery.
  • Navigate to install zip from Sdcard

Screenshot_2

  • Navigate to Toggle Signature Verification and Press Power Button and See if it is disabled or not. Disable it and then Install the Zip without any Error.

Screenshot_3

That is it, After a Successful reboot, your Huawei Ascend P6 will be running Android 4.2.2 HYD52ROM Custom ROM. Wait for At-least 5-minutes for the First run, then go to Settings > About to Verify.


  • Kosar Farhad

    I tried this and it seems that my device is stuck at the huawei logo!! I used this custom recovery the Installer Version

    • Sorry for the late reply, but if you are still stuck…go to recovery and Wipe Devlik Cache and Cache Partition…and then restart your device

      • Kosar Farhad

        I tried a lot of things to fix it including your suggestion but it didn’t work. The only way to fix that it to download the stock firmware from Huawei’s official website, extract it and transfer the firmware to your external sdcard and put it in folder named dload then install the firmware via UPDATE.APP method which is to power off you phone and then by holding the Power + Volume UP + Volume DOWN for more than 3 seconds and just wait for everything to finish.

        • Then I am afraid you will have to stuck to the Stock Firmware…=(

        • Graham

          so i have to use a card reader to get it on my sd card cos when i connect my phone nothing happens?

  • arman

    greetings
    I have Huawei ascend p6-u06. unfortunately after i have upgraded my phone,i lost my bootrom.the bootrom file is not available in Huawei support.i will be grateful for any support you can to help me.

    respectfully yours

    • Usama Mujtaba

      @disqus_XJXXXym2ID:disqus i’ll look for that and update you as soon as possible. Stay connected with us.

  • Usama Mujtaba

    @disqus_AZLz9dKMEH:disqus this is a custom ROM, it should be pre-rooted, have you tried using any root application?

    • Yellow Devil

      Yes, of course. Problem is was resolved. I rooted ones more. Thanks.

  • Andrew Owen-jones

    Thanks for great instructions, phones boots but all in chines?

    • @andrewowenjones:disqus checkout if it gives you language selection option at start, otherwise go to settings and try locating Languages in settings and set English. Good Luck.

  • sai

    can i install on b512 oe should it be done only ob b118. please reply

    • No,you can’t install this on b512, this is only for Uo6
      for more info please visit XDA threads

  • Tiri Sal

    hi. can I upgrade
    Ascend mate 2GB RAM from 4.1.2 rooted
    MT1-U06V100R001C00B113
    Please help
    Thanks

    • Yes you can…look for any latest version custom rom for your device…

  • @bandarupranay:disqus yes you can, but you should have a stock rom in the backup so that you can avoid any mishaps.

© 2016 TechBeasts. All rights reserved.· Entries RSS · Comments RSS
TechBeasts.com is not associated with Google, Samsung or any other OS provider and smartphone manufacturer. We are an unofficial fan site.