How To Install FireKatN4 Deodex V2 Custom ROM on T-Mobile Galaxy Note 4 SM-N910T

It is only a Matter of time before the device, who has been rooted and Custom Recovery being installed on it, starts getting the Custom ROMs based on AOSP, AOKP or any other Resources, some are even based on the Stock ROMs. Previously we posted the Rooting method and TWRP recovery installation method for T-Mobile Galaxy Note 4 and I also mentioned that the time is not far when you’ll be seeing Custom ROMs for this device on out Website, and I believe that time is here. There are a number of Custom ROMs available for this device, however, not able to reach the same height as this ROM has reached. Based on Android 4.4.4 Kit-Kat, build number N910TUVU1ANJ7, with a lot of amendments done under the hood and mostly done outside for the world to see.

FireKatN4 Deodex V2 is available for T-Mobile Galaxy Note 4 and the V2 refines the V1, in terms of UI animations, Launcher Speed, App launching/switching, Lock-Screen On and Off – which I believe is a very good thing as every Galaxy device has a problem with Lock-Screen because of the Home Button – Better battery life and amazing RAM management makes this ROM perfect for this device till there will be a better one available.If you are interested in Other ROMs, you can Visit our Custom ROMs section or you can install this ROM on your Galaxy Note 4 by following our tutorial below. This is not an official release from Samsung but a Custom ROM, you need to install a Custom Recovery on your device to install this and also your device must be rooted.Let’s go through the ROM features and early preparations and then flash this ROM.

892ed666b49964943d2ab8ceba27716c

Early Preparations:

1. This is only for T-Mobile Galaxy Note 4!

This custom ROM is only for the device mentioned above. Make sure that your model number matches the one listed above. To do so, go to Settings > About Device on your device and see your model number. Flashing this ROM on any other device will result in bricking it so make sure that you meet this requirement first of all.

2. Battery should be charged at least over 60%

Make sure that your battery is charged enough to complete the flashing process. In case your battery is low and your device goes dead during the flashing process, you may end up soft bricking your device as it won’t complete the flashing process.

3. Flash a Custom Recovery and Root Your device

A custom recovery, whether a TWRP or  CWM is required to flash this ROM. Also Follow the Link to root your device: Link

4. Backup everything!

Just to be on the safe side, you may consider backing up each and everything from your Android device. This is highly recommended so that in case anything goes wrong, you still have the access to all of your data and you can restore it immediately. You may backup everything as listed below.

5. Disclaimer

The methods involved in flashing custom recoveries, roms and rooting your phone are highly custom and may result in bricking your device, and has nothing to do with Google or the device manufacturer that is SAMSUNG in our case. Also rooting your device will void its warranty and you will be no longer eligible for any kind of free device services by the manufacturers/warranty providers. In case of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility.

Downloads Required:

 Android 4.4.4 Kit-Kat FireKatN4 Deodex V2: Link

Installation Process:

  • Connect your device with PC.
  • Copy and Paste the Above zip files to the root of your sdcard.
  • Disconnect the cable.
  • Turn Off your Device
  • Open Recovery mode. How? Press and hold the Volume Up + Home + Power buttons until you see some text on screen.

CWM/PhilZ Touch Recovery Users.

  1. Back-up your ROM using the Recovery.
  2. To Perform a Back-up, Navigate to Back-up and Restore on Next screen, Choose Back-up again.
  3. Go back to Main Screen after the Back-up is complete.
  4. Then Navigate to ‘advance’ and choose ‘Devlik Wipe Cache’, so you won’t get in any bootloop.
  5. Finally Select Wipe Data/Factory Reset
  6. Navigate to ‘Install zip from sd card’ another windows will open in front of you.
  7. Select ‘choose zip from sd card’ from the Options.
  8. Select the FireKatN4 Deodex V2.zip file and confirm the installation on next screen.
  9. Once the Installation is Over, Select +++++Go Back+++++
  10. Select Reboot Now to Reboot the System.

TWRP Users.

  1. Tap On Back-Up and Select System and Data
  2. Swipe the Confirmation Slider
  3. Tap on Wipe Button and Select Cache, System, Data.
  4. Swipe the Confirmation Slider.
  5. Go back to Main Menu and Tap Install Button.
  6. Locate the FireKatN4 Deodex V2.zipSwipe the Slider To install it.
  7. Once the Installation is Over, you will be promoted to Reboot System Now
  8. Select Reboot Now to Reboot the System.

Solve Signature Verification Error:

  1. Open Recovery.
  2. Navigate to install zip from Sdcard
  3. Navigate to Toggle Signature Verification and Press Power Button and See if it is disabled or not. Disable it and then Install the Zip without any Error.

First Boot might take up-to 5-minutes, so let your device rest for 5-minutes as you do something else.


© 2016 TechBeasts. All rights reserved.· Entries RSS · Comments RSS
TechBeasts.com is not associated with Google, Samsung or any other OS provider and smartphone manufacturer. We are an unofficial fan site.