Download Odin PC Latest Version [V 3.07]


Odin is a software for windows developed by Samsung to update / flashing the ROMS in Samsung Android Smartphones. It is a very easy to use and handy tool. The term flashing is used in the mobile language and means updating / modding your phone, it is mostly related to flashing the roms (operating system package files) manually in your phone while the Samsung Kies software upgrades the OS automatically. Odin can also be used to root the phone, and flash mods to personalize your phone.

Update: Download Odin3 v3.10.6 [ Latest Version ] 

Installing Odin: Installing Odin is pretty easy. There are different versions of Odin available on the web, but having the latest version installed is always recommended. In case you are using an older version, you may update to the latest one by downloading it using the link attached below, the latest version always packs up with the best functionality and the fixed bugs.

You need to download the file from the link attached below first, and then unzip the downloaded zip file and extract the files in that downloaded folder. The extracted files can be kept anywhere on your pc, these files does not need to be installed running a setup. The Odin’s exe runs the application directly.

Now after the installation process is done, head next to the connectivity. Plug in the usb cable in your phone and connect it to the PC. Turn of the phone and wait for 30 seconds and turn it on.  Open odin and you may notice a blue highlighted box on the top left. Now, there are several options in Odin, You may select only few depending upon your requirement. The image below is showing the standard settings for flashing a rom / mods / rooting the phone.

Using Odin

Check ”Auto Reboot”(Reboots your phone automatically after flashing) and ”F.Reset Time”(Resets the flash counter after upgrading the firmware). Other options (Re-partition, LED control etc) are selected upon requirement. PIT stands for partition information table, if you press the PIT button, the .pit files can be browsed in the firmware upgrade folder / package files folder, otherwise leave it as it is if there is no .pit file.

ODIN 3.07

The formats supported by Odin are *.bin, *.tar & *tar.md5. The firmware files usually come in *.tar.md5 format, you can apply these files using the PDA button in Odin. Once you have done setting up odin according to your requirements, you need to press the ”Start” button and start the flashing process, as soon as the process is finished, your device will restart automatically and you will see a ”Pass” notification on a green background on the top left corner. That’s all!

For your device to work with ODIN, you need to put it in download mode in order to start flashing the files. To do so turn off your phone and then turn it on by  pressing and holding Volume Down + Home Button + Power key simultaneously and the press Volume Up key to continue,  your phone should boot into the download mode. After that connect it to your PC and start using ODIN.

Update: Download Odin3 v3.10.6 [ Latest Version ]

Download Odin PC Version 3. 07  Here: Download Odin 3.07 

Odin 3.09 – Download HERE.

Feel free to contact us through the comment box below for any queries regarding this.

Follow Me

Usama M

+Usama M: Ex Farmviller | Android Fanatic | Software Engineer,Founder - TechBeasts.com
Follow Me
  • chamal

    sir,
    can i get odin flash files for nexus s
    model number – GT-I9020A
    please let me know ASAP!
    thanks.

    • Usama Mujtaba

      @disqus_hwIkieVXwm:disqus checkout this thread http://forum.xda-developers.com/wiki/Samsung_Nexus_S

      • chamal

        @usamamujtaba:disqus Thanks for your reply 🙂
        Please can you explain, how to use these .tgz and .zip files with I9003_Odin3 v1.82 ?
        My phone completely dead (dead boot)
        I use medusa jtag box. and then can i boot up using odin?
        Please if you explain it, i’ll highly appreciate it!
        Is this rom work with my phone?
        Build – GRK39F
        Baseband – I9020XXKF1
        Bootloader – I9020XXKA3
        Please let me know ASAP!
        Thanks.

        • Usama Mujtaba

          @disqus_hwIkieVXwm:disqus if your phone was bricked, you may be on risk flashing a new rom. Make sure that you choose a right rom matching your model number i.e I9020A. You need to explore and find the right one for you. If the roms listed above with the Baseband and Bootloader are for I9020A then go for it and the process should be safe to flash it in your Galaxy Nexus S.

          • chamal

            @usamamujtaba:disqus Yes it’s bricked.(dead boot) i can’t go to recovery mode or download mode. 🙁
            dear can you help me to repair it?
            thanks for respond.

          • Usama Mujtaba

            @disqus_hwIkieVXwm:disqus Dear the only solution now is, take your phone to the market they will either replace the bootloader or they will replace the board. That’s how it will be fixed.

          • Talha Ansari

            odin start for 1 sec then closes again what 2 do

          • osbozzy

            If the samsung logo is still being displayed at the boot, then its not hard bricked yet.
            Boot into recovery, wipe data and cache, then flash the stock ROM again.

          • osbozzy

            If in case the samsung logo is not being displayed, am afraid its hard bricked. U have to take it to the service station.
            Don’t lose patience while flashing a phone.

  • kurefu

    Hello there! Is there any problem of using Virtual Box to flash with Odin?

    • Usama Mujtaba

      @kurefu:disqus It works will with Virtual Box. Good Luck

  • Muhammed

    PLS help me to get flash files for samsung galaxy note 1 (gt n7000) jelly bean 4.1.2

    • Usama Mujtaba

      Muhammed

      Follow these steps.

      Download the latest firmware for Galaxy Note Gt N7000 from this link:

      http://hotfile.com/dl/198870705/b9b10d3/Samsung-Updates.com-GT-N7000-INU-N7000DDLSC-1362564828.zip.html

      Put your phone in download mode, unzip the downloaded file.
      Attach your phone to your pc, open odin and select PDA and give it the downloaded .tar.md5 file. 🙂 Good Luck.

      • November Nite

        Is it compatible with ICS version for the same phone? Thanks!

        • Usama Mujtaba

          @novembernite:disqus Yes it is compatible with ICS version for the same phone.

  • Devos

    Is not working on GN 2 N7100 (4.1.1)

    • Usama Mujtaba

      @disqus_9VYeBZKtEa:disqus it is compatible with GN 2. The odin 3.0.7 takes a few seconds to load the PDA file so you might need to wait a little when you give it the file.
      If you are not facing this issue, then kindly explain us, we may try to resolve it.

  • Ry Miranda

    i have a s3 4.1.2 i cant upgrade it to 4.2.2 what will i do?

    • Usama Mujtaba

      @rymiranda:disqus you can’t update it to 4.2.2 at the moment. Samsung will skip this update as we posted about it earlier. You will get 4.3 update in the month of November or December.

  • Greg Cardenas

    Hello, I bought a Galaxy Note 8 from China last month…has not Google Play. Runs 4.2.1. Will this update help or should I wait to see if the next upgrade will let me install Google Play. Otherwise, is there anyway to root this device and get this Chinese blocks off my Note? Thanks!

    • Usama Mujtaba

      @gregcardenas:disqus Odin will work with your device. But this is no update, this is just a flash tool for Samsung Devices.
      I will soon make a full guide for your Galaxy Note 8.0, and Yes rooting Galaxy Note 8.0 will help you get rid of the Chinese blocks as you can flash an mods / custom roms or unlock anything.

  • November Nite

    Hello, I have a Samsung Galaxy Note 1 GT7000 Android ICS 4.0.4, I would like to root/tweak it. Can u suggest the best compatible ROM? Can U also guide me how to upgrade it into Jelly Bean Android OS? And which OS is the best suited for my phone? Your guidance and advice are greatly appeciated. Thanks!

  • Umer

    how to update 4.3 for s3 in pakistan……current version 4.1.2…..

  • Thales Martins

    what are the uses for the PDA, BOOTLOADER, PHONE, CSC and UMS option of odin?
    Also can you give information on the uses for all the options group on the left side of the screen?

    • Usama Mujtaba

      @thales_martins:disqus hope this helps.

  • Dane Spencer

    I receive a message on my phone when I start my phone saying “Unfortunately, SuperSU has stopped working”

    • Usama Mujtaba

      @danespencer:disqus flash stock firmware and then root it again.

  • Usama Mujtaba

    @skmishu:disqus Odin is for Samsung devices only. You need to find the specific thread for your phone.

  • Anas

    I have s2 at 2.3.5 firmware. How do i update it to 4.1.2 using Odin? :/

  • fahood

    where i can get this 3 fil PDA AND PHON FIL and csc ?

    • @disqus_R3bDLMNGiQ:disqus anywhere on any Samsung’s official firmware site

  • @disqus_PViK0TxEG5:disqus flash stock firmware, and flash the recovery after that. It will go fine then. You can use this guide: http://techbeasts.com/2013/10/12/how-to-install-stock-firmware-on-samsung-android-smartphones/

    • amr

      i already have sock firmware ,,problem solved by a quite easy way to uncheck auto reboot in odin 3.04 then remove battery stand awhile and open recovery it opens alhamdullelah thank god and thank u very much for ur concern ,can u help me in a good rom to use with note 3 and s 5 features on my note 2 n7100 i will begin with phantom v 11 how do u see it ,is it good

      • @disqus_PViK0TxEG5:disqus Phatom is a nice choice to go with, but just in case you want to get note 3 and s5 features, go with Ditto Note 3 ROMs latest version or try Dr Ketan’s ROM. Both have very nice features and are well-reputed operating systems.

  • mazza

    Hi,
    I bought a Samsung galaxy gear on eBay and when I opened the outer packaging, the box was covered in Chinese text! Obviously not genuine UK model ( thinking it was as it advertised as UK stock with UK warranty ). I haven’t opened the seal of the box thinking it won’t work. However, reading this site got me wondering. Could I flash my Samsung galaxy gear? Will it be easy (given it will probably have the default Chinese when I turn it on)? I currently have the 4.4.2 android version on my rooted Samsung Galaxy S4. Your help would be greatly appreciated. Thanks.

  • mazza

    Hi,
    I bought a Samsung galaxy gear on eBay and when I opened the outer packaging, the box was covered in Chinese text! Obviously not genuine UK model ( thinking it was as it advertised as UK stock with UK warranty ). I haven’t opened the seal of the box thinking it won’t work. However, reading this site got me wondering. Could I flash my Samsung galaxy gear? Will it be easy (given it will probably have the default Chinese when I turn it on)? I currently have the 4.4.2 android version on my rooted Samsung Galaxy S4. Your help would be greatly appreciated. Thanks.

    • @disqus_XlXkaojQWP:disqus chinese language isn’t a problem at all, your gear must be original even then, the only difference is, it came from China. And yes, you can try all the Galaxy Gear tricks using posted on our site. Good Luck.

  • @disqus_Oa3fVxWwff:disqus Sammobile and Samsung-updates, on both these sites you can get your firmware’s .tar and .md5 files.

  • Ram

    Thanks Usama M

  • jerry

    where du l get the flash files for my samsun galaxy pocket

    • @disqus_Fb6aetp2tZ:disqus what files are you talking about?

  • @disqus_o99ldxDM3S:disqus yep. Flash a firmware from scratch, and before booting up, go into recovery mode, wipe cache and factory data and restart it. See if it works or not.

    • kay

      the firmware flashing..Run loaded green in tab,,,to complete…and success…auto rebooting…boot into logo samsung gt-i8190 …but ! failed to booting home screen…always restart to logo….maybe damage build in system? or hardware..

      • @disqus_o99ldxDM3S:disqus if the firmware flashing was successful, it shouldn’t stuck on boot logo, however try booting into recovery and wipe factory data and then give it a few minutes and see if it boots up or not.

    • kay

      cannot boot into recovery mode..

  • Evy Mae Monteverde

    Hi,
    i’m using Samsung galaxy note 1 GT-N7000, and i was trying to connect my phone to my computer, but unfortunately the computer says USB NOT RECOGNIZED,
    I’ve been trying to resolve this problem, uninstall my current driver and re installing it again, restarting my computer and it says, installing new driver unsuccessful, and i still don’t what’s the answer, and i also factory reset my phone, and it ends up to nothing.
    please help me how to fix this problem .
    im using Windows 7 , fortress CPU . sometimes HP
    current os of my phone is ICS 4.0.1

    please email me or reply to this thread, tnx

  • Evy Mae Monteverde

    Hi,
    i’m using Samsung galaxy note 1 GT-N7000, and i was trying to connect my phone to my computer, but unfortunately the computer says USB NOT RECOGNIZED,
    I’ve been trying to resolve this problem, uninstall my current driver and re installing it again, restarting my computer and it says, installing new driver unsuccessful, and i still don’t what’s the answer, and i also factory reset my phone, and it ends up to nothing.
    please help me how to fix this problem .
    im using Windows 7 , fortress CPU . sometimes HP
    current os of my phone is ICS 4.0.1

    please email me or reply to this thread, tnx

    • @evymaemonteverde:disqus Is our device soft bricked? or you’re only having this connection issue? try enabling USB debugging mode in developer options on your phone and then try connecting again. Or try cleaning the USB cord with some small brush or stick, and try plugging in the USB cable again.

  • @evymaemonteverde:disqus I suspect that its a problem with your device’s USB cord. I would recommend taking it to some service center and getting it replaced.

  • April Vidal

    my odin looks like that when i open the window of odin the lower part cannot view it cannot maximize, help

    • @aprilvidal:disqus please adjust your display settings to access full view of Odin.

  • shayan vaziri

    hi, I installed a ics 4.04 rom on my lg optimus black, it does not work out @ all, when I turn it un it stuck un logo mode “MARVEL” can not turn my device to recovery mode for wiping it or restart factory, downloaded your app but it does not recocnize the device and nothing happens, what do u suggest me to do? thanks.

  • Sarun Toy

    Are you can send file 4.3 free to me?

  • Reuel Attwood

    I have a Samsung SM-T320 Tab Pro 8.4. I installed Cyanogenmod a while back, but it seems to have caused my tab to slow down a lot. I unrooted it just now, following the directions above. It works, but as soon as the “SAMSUNG” animation finishes, it leaves “SAMSUNG” up on the screen, and is completely unresponsive.

    Is there another image I need for the factory configuration? Did I do something wrong?

    • @reuelattwood:disqus the samsung screen can take up to 10 minutes. Do you still have this issue?

      • Reuel Attwood

        I went all over the place, searching for ideas. Turns out I just have to restart with the power and up volume button, and reset to factory defaults. That should be in the instructions somewhere, I think. Now I’m thinking about trying with Android 6…

  • very nice guide dude really helpfull for me odin 3.07

  • Марат

    i dont unstal recovery on samsung note 2 n7100 . help me !!!

  • Santanu Guria

    110% right

© 2018 TechBeasts. All rights reserved.·
TechBeasts.com is not associated with Google, Samsung or any other OS provider and smartphone manufacturer. We are an unofficial fan site.
6 Shares